Sign in, say "hi", ... and be welcomed.

Re: The 5 ft-packed-HG Movement

Postby JoeF » Mon Nov 16, 2026 10:22 pm

totable HGs
=================================================
Beak airfoil stuffer options are many.
A first era competition might be between airbeam stuffer vs. carbon hoop-and-sleeve former (tapered hoop diameters allowing collapse to ruffled disk during pack and tote.

A third direction competes: Rolled Mylar film. Short width wrap toted spar nets; then at HG assembly roll 2.5 times to get beaking stuffer. Seat the stuffer onto the two parallel (minor stayed) framing cables.

===================================================
MylarRollsNov16of2026AiGemini.jpg
Caution, the drawing has many errors. AI produced drawing from rash prompts.
MylarRollsNov16of2026AiGemini.jpg (70.28 KiB) Viewed 3331 times

====================================================
Join a National Hang Gliding Organization: US Hawks at ushawks.org

View pilots' hang gliding rating at: US Hang Gliding Rating System
JoeF
User avatar
Contributor
Contributor
 
Posts: 4888
Joined: Sat Aug 14, 2010 3:41 pm

Re: The 5 ft-packed-HG Movement

Postby dhmartens » Tue Nov 17, 2026 9:58 pm

I have fought all I can and expended $5,000 from a 401k and I have been working double shifts since June yet he seems to be promoting our sport on reddit. https://shga.com/topic/what-happened-to ... s/page/15/
dhmartens
User avatar
Contributor
Contributor
 
Posts: 611
Joined: Thu Jul 11, 2013 6:28 pm
Location: Reseda California

Re: The 5 ft-packed-HG Movement

Postby dhmartens » Wed Nov 18, 2026 11:01 pm

dhmartens
User avatar
Contributor
Contributor
 
Posts: 611
Joined: Thu Jul 11, 2013 6:28 pm
Location: Reseda California

Re: The 5 ft-packed-HG Movement

Postby JoeF » Thu Nov 19, 2026 2:51 pm

For the ultra-portable, busable tensegrity hang glider (Wing5, or WingBusable, etc.), I’m exploring letting existing spar coupler collars double as mechanical stoppers for soft Dyneema rigging loops.

Instead of cross-drilling carbon tubes for heavy metal tangs, spliced rigging eyes simply slip onto the spars and seat against the collar shoulders under tension. It cuts weight, avoids stress raisers, speeds up tool-free assembly, and packs politely.
:idea:

Concept illustration only—not to scale or exact load geometry. In practice, line tension pulls the loop forward into a "Y" bridle shape rather than keeping it flat against the collar face. A production collar would also feature a taller flange and a radiused/contoured groove to positively capture the line and minimize chafe.

AiRsponseToPrompsNov192026CollarLoopStopJoeF.jpg
Caution; image is unrealistic; hugging loop would stressed and different shape; there would be Y effect; and the collar would be of higher flange and perhaps complex holding shape to better handle line tension and line hugging for less wear.
AiRsponseToPrompsNov192026CollarLoopStopJoeF.jpg (57.5 KiB) Viewed 2096 times
Join a National Hang Gliding Organization: US Hawks at ushawks.org

View pilots' hang gliding rating at: US Hang Gliding Rating System
JoeF
User avatar
Contributor
Contributor
 
Posts: 4888
Joined: Sat Aug 14, 2010 3:41 pm

Re: The 5 ft-packed-HG Movement

Postby dhmartens » Thu Nov 19, 2026 10:02 pm

Thank You BobK and JoeF Choppergirl and the rest(Professor and Mary Ann) sticking with me through this battle, as a reward I will fire up the expanded Gemini AI and ask for a schematic. Image
Image
dhmartens
User avatar
Contributor
Contributor
 
Posts: 611
Joined: Thu Jul 11, 2013 6:28 pm
Location: Reseda California

Re: The 5 ft-packed-HG Movement

Postby JoeF » Fri Nov 20, 2026 6:37 am

Thanks, Doug! :salutes: :salutes: :salutes: :salutes: :salutes:
The your above-post IBEX drawing's date of "1979" might be a fake date. Do you want to state the actual date of the drawing's origination date? :( :?:
==========================================================
Two posts above, the AI drawing has another error to be noted:
The rigging line loop is not to be seated on the CF tube, but rather should have been shown up on the collar where the collar should have been with an integrated flange customized to stop the inboard sliding of the rigging loop.

Edited response of AI-assisted drawing below still has some minor errors: :arrow: :arrow: Caution.
:arrow: Note: And the domed plug can have a much shorter length than shown. At packing the domed plug might stay in place or not, depending on logistics of packing and telescoping. The domed end plug protects the strap and prevents collapse injury to the end of the Child tube.
:arrow: Note: At derigging for packing and toting, the Joe-Cup-Strap and Rigging Line fully separates from the Mother and Child tubes.
:arrow: Note: The strap plays several roles: Child-insertion limiter and wobble-resist gap filler.
:arrow: Note: The strap is firmly integrated with the collar-lip-flange part.
:arrow: Note: The ingoing lip that is on the collar-lip-flange part butts firmly against the end of the Mother tube. A ring of hard rubber is not shown in the drawing; the Mother Tube end might have a metal ring bonded to it; such metal ring would press against the rubber ring.
Ai rewrite of note wrote: :arrow: End-Wall Interface (Not Shown): The ingoing lip on the collar assembly butts firmly against the end of the Mother tube. In a finished build, a metal reinforcement ring bonded to the Mother tube end would press against a hard rubber cushioning ring seated inside that lip.

JoeCupRiggingNov20of2026AiAssistJoeF.jpg
JoeCupRiggingNov20of2026AiAssistJoeF.jpg (68.97 KiB) Viewed 1521 times


===================================
“Be patient toward all that is unsolved in your heart and try to love the questions themselves, like locked rooms and like books that are now written in a very foreign tongue. Do not now seek the answers, which cannot be given you because you would not be able to live them. And the point is, to live everything. Live the questions now. Perhaps you will then gradually, without noticing it, live along some distant day into the answer.”
― Rainer Maria Rilke

====================================
Join a National Hang Gliding Organization: US Hawks at ushawks.org

View pilots' hang gliding rating at: US Hang Gliding Rating System
JoeF
User avatar
Contributor
Contributor
 
Posts: 4888
Joined: Sat Aug 14, 2010 3:41 pm

Re: The 5 ft-packed-HG Movement

Postby JoeF » Fri Nov 20, 2026 2:44 pm

Additional Notes on the Collar-Flange and Joe-Cup Strap

To improve durability and prevent debonding under load, round the collar-flange part at the Child end—specifically on the exterior edge facing the Child tube.
The strap of the Joe-Cup Strap Coupler should bond along the following path:
• Across the top of the collar-flange lip
• Down the Child-end face
• Along the exterior face of the collar-flange all the way to the base of the flange
This continuous bond secures the strap and acts as a positive stop, ensuring the Child tube inserts only to its intended design depth inside the Mother tube.
Because tension in the strap creates shear stress along the adhesive joint, the two rounded edges and the extended bonding path work together to keep the strap from peeling or debonding from the collar-flange.
If additional holding power is needed, one could use one of two reinforcement methods:
• Hook-and-Loop Rigging Capture: Leverage the downward pressure of the rigging line by extending the strap to wrap over and capture the line, securing the end with a hook-and-loop fastener. This adds mechanical retention while still allowing for easy rigging line change-outs.
• Bonded Perma-Wrap: Apply a permanent outer wrap bonded directly around the outside of the collar-flange to lock down and secure both ends of the strap.
Join a National Hang Gliding Organization: US Hawks at ushawks.org

View pilots' hang gliding rating at: US Hang Gliding Rating System
JoeF
User avatar
Contributor
Contributor
 
Posts: 4888
Joined: Sat Aug 14, 2010 3:41 pm

Re: The 5 ft-packed-HG Movement

Postby dhmartens » Fri Nov 20, 2026 9:10 pm

Yes JoeF my highly trained Gemini AI model needed only breif instructions for the first diagram:
(can you create an image diagram of how this breaks down, use the james bond movie moonraker (1979) as a guide)

and for the second diagram these were the instructions:
(section 3 telescopic spar collapse, lets show close up details in a new image)

since it has scanned the entire ushawks.org and shga.com it works very well.


This is my initial request and its response:
(5foot hang glider movement)

response:
The "5 ft-packed-HG Movement" is an ongoing concept and design challenge within the hang gliding community—most notably championed by Joe Faust (JoeF) on the US Hawks Hang Gliding Association forum—focused on creating a safe, foot-launched hang glider that breaks down into a 5-foot (or shorter) package.

Core Goals of the Movement

• Car-Free Portability. The primary benchmark is "bus-ability"—allowing a pilot to transport a complete hang glider on public transit, inside a compact car trunk, on a motorcycle, or as standard airline luggage without needing a roof rack or truck.
• Accessible Flight. Early concepts targeted gentle coastal and training hill flying (such as "Dandy Handy Dockweiler" sledders in conservative conditions), though more ambitious designs aim for full cross-country and soaring capability.
• Rapid Assembly. A key priority is making the breakdown and setup process fast and straightforward—such as wrapping the sail after the frame is up, or removing the sail first before collapsing the frame.

Structural & Design Approaches

Because standard hang gliders typically short-pack to around 6 to 8 feet (or remain 16+ feet full-length), hitting the 5-foot mark requires unconventional engineering:
• Telescopic and Tapered Spars. Using multi-stage telescoping tubes or segmented, tapered spars made from carbon fiber, fiberglass, or titanium to drastically reduce packed length.
• Space Frames and Alternative Bracing. Exploring truss/space-frame structures, angled cross-sections, and non-metal cables to keep weight down while maintaining structural integrity under flight loads.
• Multi-Purpose Tote Parts. Designing the carrying bag, wheels, or skids so that every component used to haul the glider either integrates into the airframe or packs cleanly without adding dead weight.

Historical & Community Context

While the modern thread on US Hawks dates back to 2015, discussions on the Sylmar Hang Gliding Association forum note that ultra-compact, 5-foot packable glider concepts actually trace their roots all the way back to 1961, during the earliest experimental days of Rogallo wings and portable gliding.
Are you looking to explore specific design ideas for short-packing an existing glider, or are you trying to dig up specific posts or builders from the forum threads?


JoeF I left the session open, ask your question I will forward it into this highly trained AI.
dhmartens
User avatar
Contributor
Contributor
 
Posts: 611
Joined: Thu Jul 11, 2013 6:28 pm
Location: Reseda California

Previous
Forum Statistics

Who is online

Users browsing this forum: No registered users and 102 guests

Options

Return to Hang Gliding General